Direct replacement for your stock front upper strut mount. Machined from T6061 Aluminum and uses high-grade, teflon-lined spherical bearings and grade 10.9 pressed-in studs for easy install.   Adds approx. -1.3° to the front with minimal caster change.

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends...

Our Rear Tie Rods for your 981/718 GT4 GT4RS  are here!  The Rod ends are PTFE Extreme strength extended units. These are custom made for us by FK Rod ends and have extra long 2 5/8” of threaded end for more adjustment, strength, and...

Contains multiple shims in various sizes for front and rear lower control arms on 992 GT3 cars.   Front Kit contents: 4x - .031" / .75mm 2x - .063" / 1.5mm 2x - .125" / 3.2mm 2x - .188" / 4.75mm 2x - .250"...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

Stock Brake ducts attach directly to the Dundon Tension Arms! No zip ties! No brake duct flopping around. Tension arm shims ARE included. 0.8mm x4 qty 1.6mm x 2 qty 3.2mm x2 qty 9.5mm x2 qty 12.7mm x2 qty EASILY adjust caster to properly...

Contains multiple shims in various sizes for front and rear lower control arms on 991 GT3 and GT3RS cars.   Front Kit contents: 4x - .031" / .75mm 2x - .063" / 1.5mm 2x - .125" / 3.2mm 2x - .188" / 4.75mm 2x...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

Exclusive to 992 GT3 and 992 GT3RS. Stock camber adjustment is limited to -2.5°. Add Dundon's Upper Camber Link to achieve up to -4.0°! The actual number will depend on your lower control arm configuration and the ride height, but this makes achieving your...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

When you increase negative camber (via a longer lower control arm), the stock tension arm does not allow for adjustment to correct the change in caster. Dundon's adjustable Tension Arms allow for full adjustment and precise locating of the wheel in the wheel well....

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

Complete set (of 6) rear "dog bone" control arms for your 991 GT3, GT3RS or 992 GT3. Remove rubber from the rear suspension for better feel, less slop, and more grip!

1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...

The factory lower inner control arm (LCA) has mounting studs that are too short to achieve a “good” performance alignment. Dundon's extended-length LCA's add not only track width, but stud length, to safely increase negative camber without running out of threads. Two different lengths...