Porsche 992.2 Turbo & Turbo S

992 Carrera turbo S.png__PID:6349e335-90c6-4d56-a6f7-bffa265b332b

992.2 Turbo / Turbo s Products

Suspension Upgrades Brakes & Wheels Tools & Safety

Products by category

Porsche 992.2 Turbo & Turbo S — Complete Performance Catalog

You didn’t choose a Porsche 992 Turbo or Turbo S to blend in. You bought Stuttgart’s flagship because it turns every highway on-ramp into a time warp and every cars-and-coffee crowd into your personal cheering section.

At Dundon Motorsports we match that energy with American-built, race-validated components that liberate every horsepower the factory left on the table—while protecting the sophistication that makes a 911 easy to daily. Whether you’re chasing top-speed runs at Sun Valley, shaving tenths at Watkins Glen, or just want the g-force thrill every morning, our catalog has a pressure-optimized answer.

Products by category

Suspension Brakes & Wheels Tools & Safety

Track-Ready Suspension Upgrades

Suspension is where most Turbo and Turbo S drivers feel the biggest improvement per dollar. The chassis is extremely capable, but factory adjustment is limited. A suspension package for 992 Turbo or a suspension package for Turbo S opens up usable camber, caster, and toe so you can run proper track alignments and keep outer shoulders alive.

The hardware mix is designed to be serviceable and predictable: extended front tie rods for Turbo and Turbo S (you’ll often see them searched as “tire rods”), two-piece lower control arms with shims for repeatable camber, adjustable tension arms to set caster accurately, and matched rear control arms so rear geometry holds when the car is loaded. S

pring rates for Turbo S are selected around your tire, venue, and comfort target; dual-duty cars get compliance for the street with real support on track, while track-forward builds trade a bit of ride for platform control under big braking and aero load.

Dundon Motorsports Suspension Setup Package for 992 Turbo/Turbo S - Dundon Motorsports

Dundon Motorsports Suspension Setup Package for 992 Turbo/Turbo S

The 992 Turbo and Turbo S are great cars, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. The impressive power and acceleration also cause premature wear on many of the rubber bushings. Our suspension arm packages really open things up, allowing you to get a "proper" alignment on the car for better tire wear, improved handling, sharper steering feel and a better driving experience!

Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.

These packages will allow for a precise and accurate alignment with a wide range of camber, toe and caster settings. They also remove rubber from the suspension system, improving steering feel and turning your 911 into a razor-sharp, corner-carving monster!

992 Turbo/Turbo S Suspension Setup Package

Basic: Gives your 911 Turbo adjustable front suspension to improve the steering feel, turn-in response and front grip.

Extended Titanium Front Tie Rod Ends (to correct Toe).
Two-piece Front Inner Lower Control Arms (with shims) to increase track width and add negative camber.
Adjustable Tension Arms (to dial in Caster).

Advanced: Gives your 911 Turbo adjustable suspension front and rear to get a proper alignment on the car.

Full Basic Package
Adjustable Rear Lower Control Arm (allows for adjustable camber, using included shims).

Pro: Get all the rubber out of the whole suspension for the ultimate “connection” to the road and confidence.

Full Advanced Package
Rear Knuckle Spherical Bearing Upgrade (comes with installation tool). MUCH needed on the Turbos!
Rear Tension/Control Arms “Dog Bones”.

Our suspension parts utilize the highest quality teflon-lined FK bearings, high-grade studs and nuts, billet aluminum and Titanium construction (when applicable) and a unique, thoughtful design.

Lower Control Arms use extended studs allowing for more shims and increased negative camber.
Titanium tie rod ends feature pinch bolts and extended threads for security when increasing track width and negative camber.
Adjustable Tension arms with shims to easily dial in caster.

Add a Motion Control Suspension coilover system for a complete transformation!

Dundon by MCS 1-Way Adjustable Suspension Package for perfect road manners.
Dundon by MCS 3-Way Adjustable Suspension Package for the ideal balance for street and track driving.

$3,650.75

$4,295.00