1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...

1. Improved Adjustability - Increased Negative Camber The factory LCAs (Lower control arms) have limited adjustability and thus limited alignment options. Our LCA's are slightly longer, and feature high-grade, extended length studs, which allows for the use of adjustment shims to dial in your...

The factory lower inner control arm (LCA) has mounting studs that are too short to achieve a “good” performance alignment. Dundon's extended-length LCA's add not only track width, but stud length, to safely increase negative camber without running out of threads.   Two different...

Fits 991.2 GT3RS Weissach Package Cars

Don't have a roll bar or you want to mount your MCS canisters elsewhere? Our rear canister mounting kit is perfect for you. The brackets slide ride into the rear carpet, no modification required and still easily accessible so you can adjust canister pressures...

1. Adjustability - Increased Negative Camber The factory LCAs (Lower control arms) are not adjustable leaving you with limited alignment options. Our LCAs are two pieces featuring an inner and an outer arm, connected by extended length studs which allows for the use of...

Our Rear Tie Rods for your 981/718 GT4 GT4RS Clubsport are here! Fully serviceable with replaceable rod ends vs having to purchase a whole new pair from PMNA or Motorsports. The Rod ends are PTFE Extreme strength extended units. These are custom made for...

Why do you need adjustable sway bar end links? To ensure perfect corner-balance and zero pre-load on your sway bars with Dundon Motorsports' NEW adjustable sway bar end link set (front & rear).   When your Carrera is corner-balanced or when you simply sit...

Dundon's Adjustable Sway Bar End Links meet the highest quality standards. We built these using the best rod-ends and spherical bearings in the industry (FK) alongside proper motorsport design concepts (like pinch bolts). Anodized billet aluminum ensures high strength and light weight. These end...

1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...

1. Improved Adjustability - Increased Negative Camber The factory LCAs (Lower control arms) have limited adjustability and thus limited alignment options. Our LCA's are slightly longer, and feature high-grade, extended length studs, which allows for the use of adjustment shims to dial in your...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

1. Adjustability - Increased Negative Camber The factory LCAs (Lower control arms) are not adjustable leaving you with limited alignment options. Our LCAs are two pieces featuring an inner and an outer arm, connected by extended length studs which allows for the use of...

1. Increased Negative Camber The factory LCAs (Lower control arms) are not adjustable leaving you with limited alignment options. Our LCAs are two pieces featuring an inner and an outer arm, connected by extended length studs which allows for the use of adjustment shims...

Our Front Titanium Tie rods for your 991 GT3 Cup car are here! Fully serviceable with replaceable rod ends vs having to purchase a whole new pair from PMNA or Motorsports. The Rod ends are PTFE Extreme strength extended units. These are custom made...

Our Front Titanium Tie rods for your 981/718 GT4 or GT4RS Clubsport are here! Fully serviceable with replaceable rod ends vs having to purchase a whole new pair from PMNA or Motorsports. The Rod ends are PTFE Extreme strength extended units. These are custom...

Dundon's Adjustable Sway Bar End Links meet the highest quality standards. We built these using the best rod-ends and spherical bearings in the industry (FK) alongside proper motorsport design concepts (like pinch bolts). Anodized billet aluminum ensures high strength and light weight. These end...

A pair of Lower Control Arm assemblies for your Porsche 991 GT3 Cup or 981/718 Clubsport with serviceable bearings for easy care and feeding.  These arms use PTFE Monoballs with hardened stainless races to prevent corrosion. Press fit and retained with a snap ring...

Our Rear Tie Rods for your 991 or 992 Carrera/S/4S/GTS are here!  The Rod ends are PTFE Extreme strength extended units. These are custom made for us by FK Rod ends and have extra long 2 5/8” of threaded end for more adjustment, strength,...