Dundon Motorsports 991 Cup, 981/718 Clubsport Lower Control Arm Assemblies - Pair

A pair of Lower Control Arm assemblies for your Porsche 991 GT3 Cup or 981/718 Clubsport with serviceable bearings for easy care and feeding. 

These arms use PTFE Monoballs with hardened stainless races to prevent corrosion. Press fit and retained with a snap ring for easy serviceability and replacement of the bearings when at the end of their service life. Easy to remove and replace on site, at the track, or during an end-of-season refresh, just by removing the retaining ring and pressing out. No Spanner wrench and crossing fingers needed. 

These arms fit all OEM brackets, ducts, clamps, and other accessories just like the OEM arms do. 

The spacers are machined to exacting tolerances to the hardware, within .05mm, for zero excess play and no variance on installation. 

PLEASE CHOOSE +3mm or +15mm Lengths. General recommendation: 991 Cup has +15 front. And 981/718 CS has +3 front and +15 rear.

****THESE PARTS DO NOT FIT STREET GT3’s or GT3RS or any other street Porsche***