
GuideAerodynamics
Dundon Motorsports 992 GT3 Aero Package Data Analysis
Sector-by-sector data from a customer's 992 GT3 at Circuit of the Americas, before and after the Valkyrie aero package, with the rest of the car unchanged.
Articles & Videos
Dyno days, track tests, install guides and straight answers from the Dundon Motorsports team.

GuideAerodynamics
Sector-by-sector data from a customer's 992 GT3 at Circuit of the Americas, before and after the Valkyrie aero package, with the rest of the car unchanged.

VideoOn Track
Adam LZ goes for a new lap record with his 992 GT3 featuring our Dundon Exhaust! Watch the video, shop the parts, and see if it's his fastest lap yet!

GuideAerodynamics
The staged 992 GT3 aero kit: dual dive planes with a Gurney flap, then the Valkyrie swan neck wing and a carbon splitter, developed with Zebulon engineers.

GuideAerodynamics
Chapter 2 of our 992 GT3 build: PFC Track Day Kit brakes, Dundon-spec MCS 3-way dampers that keep front axle lift, and the dive plane and Valkyrie wing stages.

GuideEngine Performance
Chapter 1 of our 992 GT3 build: stock dyno runs across the 4.0-liter GT3 engine family, then two prototype header designs compared on the dyno.

ArticleEngine Performance
Customer dyno results for the Dundon 997 Resonance Intake Manifold: a 997.2 GT3 with Race Headers and a 997.2 GT3 RS from Mantis Autosport in Canada.

GuideAerodynamics
The last 718 GT4 update: why we dropped the splitter for dual dive planes and an adjustable carbon wing, the Crack Pretzel test and stock vs modified laps.

ArticleEngine Performance
Why our 997 GT3 and GT3 RS intake manifold uses second-order resonance instead of the factory third-order design, with a 100mm throttle body and a nylon build.

VideoOn Track
Chapter 4 of our 718 GT4 project: Street Headers on track, a muffler test that cost downforce, softer MCS springs and laps compared with our 991.2 GT3 RS.

GuideAerodynamics
991.2 GT3RS Aerodynamics developed using Computational Fluid Dynamics and Tested on Track. Make your car faster and easier to drive fast With Dundon Motorsports

VideoExhaust
How we built the 718 GT4 Street Headers: mandrel-bent 321 stainless, three pieces per side, v-band joints, bolt-on with no tune. Dyno charts and sound clips.

VideoOn Track
Episodes 1 to 3 of our 718 GT4 build: E-Motion Engineering arms, MCS dampers and AP Racing brakes go on, plus header CAD previews and the stock baseline dyno.
Showing 24 of 56