-
MCS 3-Way Suspension Package for 991.1 & 991.2 GT3 with front axle lift
For a long time you had to sacrifice your street drivability if you wanted to upgrade to a motorsports damper. No longer! Our Dundon-spec MCS 3-Way dampers improve your GT3's already formidable handling, while adding adjustability and forgiveness. We help make the car easier...- $13,395.00
- $13,395.00
- Unit price
- / per
-
MCS 3-Way Suspension Package for 991 GT3 without front axle lift
For a long time you had to sacrifice your street drivability if you wanted to upgrade to a motorsports damper. No longer! Our custom Dundon-spec MCS dampers offer incredible drivability on the road and stunning on-track performance to take your 991.1 or 991.2 GT3...- $12,195.00
- $12,195.00
- Unit price
- / per
-
Dundon Motorsports Track Day Setup Package for 991.1 & 991.2 GT3
Approach your 991 GT3 upgrade journey in the right steps for you and how you use your car!  Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.  These packages will allow for...- From $3,195.00
- From $3,195.00
- Unit price
- / per
-
991 GT3/RS & 992 GT3 Rear "Dog Bone" Control Arm set - Complete
Complete set (of 6) rear "dog bone" control arms for your 991 GT3, GT3RS or 992 GT3. Remove rubber from the rear suspension for better feel, less slop, and more grip!- $2,760.00
- $2,760.00
- Unit price
- / per
-
Dundon Motorsports Rear Lower Control Arms 991 GT3/RS
1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...- $1,955.00
- $1,955.00
- Unit price
- / per
-
Adjustable Front Lower Control Arm Pair for 991 GT3
1. Improved Adjustability - Increased Negative Camber The factory LCAs (Lower control arms) have limited adjustability and thus limited alignment options. Our LCA's are slightly longer, and feature high-grade, extended length studs, which allows for the use of adjustment shims to dial in your...- $1,825.00
- $1,825.00
- Unit price
- / per
-
DSC Suspension Control Module - 991 Platform
Great for track cars as we can build a custom map for the shocks for each track you go to, no more fiddling with knobs or trying various settings only to end up frustrated. We can log the cars performance and make changes to...- $1,500.00
- $1,500.00
- Unit price
- / per
-
Dundon Motorsports Extended Length Titanium Tie Rod End Set
When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends...- $1,395.00
- $1,395.00
- Unit price
- / per
-
Dundon Motorsports Adjustable 991/981/718 GT Front Tension Arm Pair
Stock Brake ducts attach directly to the Dundon Tension Arms! No zip ties! No brake duct flopping around. Tension arm shims ARE included. 0.8mm x4 qty 1.6mm x 2 qty 3.2mm x2 qty 9.5mm x2 qty 12.7mm x2 qty EASILY adjust caster to properly...- $1,315.00
- $1,315.00
- Unit price
- / per
-
991 GT3 & GT3RS Adjustable Sway Bar End Link Set - Front & Rear
GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...- $905.00
- $905.00
- Unit price
- / per
-
991 GT3/RS Rear Lower Control Arm Inner - Pair
Stock 991 GT3 length rear lower inner control arms. Remove rubber from the rear suspension for better feel, less slop, and more grip!- $799.00
- $799.00
- Unit price
- / per
-
-
991 GT3/RS Rear Lower Control Arm Outer - Pair
991 GT3/RS & 992 GT3 Rear Outer Lower Control Arm pair - For use with Dundon Inner LCA's- $595.00
- $595.00
- Unit price
- / per
-
991 GT3/RS & 981/718 GT4/RS Front Upper Strut Mounts / Camber Plates
Direct replacement for your stock front upper strut mount. Machined from T6061 Aluminum and uses high-grade, teflon-lined spherical bearings and grade 10.9 pressed-in studs for easy install.  Adds approx. -1.3° to the front with minimal caster change.- $595.00
- $595.00
- Unit price
- / per
-
991 GT3/RS Suspension Shim Kit - Complete (Front & Rear)
Contains multiple shims in various sizes for front and rear lower control arms on 991 GT3 and GT3RS cars. Â Front Kit contents: 4x - .031" / .75mm 2x - .063" / 1.5mm 2x - .125" / 3.2mm 2x - .188" / 4.75mm 2x...- $400.00
- $400.00
- Unit price
- / per
-
MCS Rear Canister Mounting Kit For 991/992
Don't have a roll bar or you want to mount your MCS canisters elsewhere? Our rear canister mounting kit is perfect for you. The brackets slide ride into the rear carpet, no modification required and still easily accessible so you can adjust canister pressures...- $300.00
- $300.00
- Unit price
- / per
-

















