GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

1. Eliminates the OPF  2. No Check Engine Lights, and no tuning required  3. 992 GT3RS Stock - 474whp,  992 GT3RS  with Street Headers is 495whp (so far)… 4. Weight savings over stock: 321 Stainless Steel Muffler version: 10lbs lighter than stock Titanium Muffler:...

Contains multiple shims in various sizes for front and rear lower control arms on 991 GT3 and GT3RS cars.   Front Kit contents: 4x - .031" / .75mm 2x - .063" / 1.5mm 2x - .125" / 3.2mm 2x - .188" / 4.75mm 2x...

The 992 GT3 and 991.2 Speedster mark a drastic departure in exhaust configuration when compared with the last 15+ years of 911 GT3. Gone are the large side mufflers and nearly universal center muffler. The 992 platform has a gigantic and complicated center muffler...

The 992 GT3 and 991.2 Speedster mark a drastic departure in exhaust configuration when compared with the last 15+ years of 911 GT3. Gone are the large side mufflers and nearly universal center muffler. The 992 platform has a gigantic and complicated center muffler...

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends...

Direct replacement for your stock front upper strut mount. Machined from T6061 Aluminum and uses high-grade, teflon-lined spherical bearings and grade 10.9 pressed-in studs for easy install.   Adds approx. -1.3° to the front with minimal caster change.

Designed in CFD (computational fluid dynamics) to provide the maximum increase in downforce with minimal drag, our Dual Dive Planes and Valkyrie Swan Neck Wing increase downforce by nearly 2X 100mph (stock wing at 5°)! Constructed of beautiful gloss carbon fiber, these pieces add...

These replacement rings are sold in pairs and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.   Please note that unless specifically noted, GiroDisc replacement rings are only designed to work with GiroDisc hats. They are not designed to...

The Girodisc system is a direct replacement for the OE disc on the 991 GT3 and GT3 RS with OEM iron rotors.  No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application.  The disc will bolt directly...

With a configurable internal compartment and pockets built specifically to carry your Helmet, HANS Device, Nomex driving gear and shoes, this bag has everything you need, and nothing you don't.   A comfortable top handle, modular shoulder strap, and roller bag handle sleeve make...