Stock Brake ducts attach directly to the Dundon Tension Arms! No zip ties! No brake duct flopping around. Tension arm shims ARE included. 0.8mm x4 qty 1.6mm x 2 qty 3.2mm x2 qty 9.5mm x2 qty 12.7mm x2 qty EASILY adjust caster to properly...

The factory lower inner control arm (LCA) has mounting studs that are too short to achieve a “good” performance alignment. Dundon's extended-length LCA's add not only track width, but stud length, to safely increase negative camber without running out of threads. Two different lengths...

Exclusive to 992 GT3 and 992 GT3RS. Stock camber adjustment is limited to -2.5°. Add Dundon's Upper Camber Link to achieve up to -4.0°! The actual number will depend on your lower control arm configuration and the ride height, but this makes achieving your...

Approach your 991 GT3RS upgrade journey in the right steps for you and how you use your car! Improve your suspension beyond the factory Weissach Package cars!   Our meticulously designed and carefully curated suspension packages are built to give you the improvement and...

Approach your 991.2 GT3RS or GT2RS upgrade journey in the right steps for you and how you use your car! The factory Weissach package takes care of a lot, and these packages handle the rest!   Our meticulously designed and carefully curated suspension packages...

When you increase negative camber (via a longer lower control arm), the stock tension arm does not allow for adjustment to correct the change in caster. Dundon's adjustable Tension Arms allow for full adjustment and precise locating of the wheel in the wheel well....

Built specifically for 991 GT3RS and GT2RS cars. Add negative camber and increase front track width with our extended front inner lower control arm. Extended studs allow for additional shims to hit your camber targets. Also removes rubber bushings from the steering system for...

1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...

Complete set (of 6) rear "dog bone" control arms for your 991 GT3, GT3RS or 992 GT3. Remove rubber from the rear suspension for better feel, less slop, and more grip!

Pre-Owned Replacement tip sets for your Dundon Lifetime Muffler ONLY. Does NOT fit OE Porsche Mufflers. Proper tip length is important, so please ensure you select the correct application.

Approach your 992 GT3RS upgrade journey in the right steps for you and how you use your car! Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.  These packages will allow for a precise...

End piece of the plastic lip spoiler. Left Side only.

End piece of the plastic lip spoiler. Right Side only.

Pair of Rotor Hats