997 991 Tension arm Bolt and spacer Kit

The bolt kits are for one PAIR of LCAs, so 2 bolts, or for ONE AXLE worth

The spacers are for one PAIR of LCAs so 4 spacers for ONE AXLE worth

The spacers are to convert the Tension arms for use on an OEM 996/997 GT3/RS LCA with the 43mm caster puck thickness.

For a 997 GT3 converting to Dundon Tension arms AND LCA's only the bolts are needed. 1 kit per axle.

When converting to Dundon Tension arms with OEM 997 GT3 43mm LCA's then 1 set of bolts and 1 set of spacers is needed per axle.

When installing Our tension arms on a 996/986 with OEM style LCA's you will need our Spacers AND bolts

If installing our Tension arms on a 997, front and rear, with OEM LCA's the front will fit with the stock hardware. The rear will need spacers and bolts.

For a WHOLE CAR or 4 LCA's worth. QTY 2 sets of bolts and spacers are needed.