Suspension

Dundon Motorsports Suspension Setup Package For 992.1 Carrera/S/4S/GTS

Rated 5.0 out of 5, 1 review

Listed for992.1Carrera

Confirm fit

Sale price$3,952.50 Regular price $4,650 −15% · Black Friday

You save $697.50 · ends Nov 30

In stock · only 2 left

Get the handling you've been craving in your 992.1 Carrera/S/4S/GTS. A full package for both adding camber, dialing in toe and reducing caster!

Drivetrain RWD (Carrera/S/GTS)
Stage Basic

Part # 400-30182

  • 30-day Dundon GuaranteeLove it or send it back within 30 days.

    Dundon Motorsports stands behind our products with a 30-day love-it guarantee. We are confident in the quality and performance of our upgrades, but if for any reason they don't meet your standards or help you push your performance on track, you can send them back within 30 days.

Questions about this part?

Mon–Fri, 8am–5pm PT

Overview

The 992.1 Carrera/S/4S/GTS is a great car, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. Our suspension arm packages really open things up, allowing you to get a "proper" alignment on the car for better tire wear, improved handling, sharper steering feel and a better driving experience!

 

Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.

 

These packages will allow for a precise and accurate alignment with a wide range of camber, toe and caster settings. They also remove rubber from the suspension system, improving steering feel and turning your 911 into a razor-sharp, corner-carving monster!

 

Which generation do I have?

  • 992.1 vs 992.2 is decided by your VIN, not the model year. Model-year 2025 cars were built as both.
  • MY2025 owners: check the front lower ball-joint nut (992.1 Carrera = M12 stud with an 18 mm nut; 992.2 Carrera = M14 nut), or put your VIN in the order notes and we will confirm your generation before we ship.
  • Have a 992.2 Carrera/S/4S/GTS? Use our 992.2 Carrera/S/4S/GTS Suspension Setup Package.

AWD (Carrera 4/4S/4 GTS): choose "AWD" under Drivetrain. AWD packages include our 15 mm Front Axle Spacer Kit, bagged separately with a "Do not install unless measured" card. Before installing any parts, measure the axle-to-differential flange gap at stock ride height and alignment, then measure again after the alignment is finished. Install the spacers only if the measurement calls for them — the procedure is in our AWD Front Axle Spacer instructions. Installing them when they aren't needed can damage the driveshafts or differential.

When you'll need them: with less than 16 mm (5/8") of LCA shim per side, measure the axles as described above or call us before deciding. With more than 16 mm of shim per side, or if the car is lowered significantly, the spacers are typically needed, but still measure the axles and call us to confirm.

992.1 Carrera/S/4S/GTS Suspension Setup Package

 

 

Advanced: Gives your 911 adjustable suspension front and rear to get a proper alignment on the car.

  • Extended Titanium Front Tie Rod Ends (to correct Toe).
  • Two-piece Front Inner Lower Control Arms (with shims) to increase track width and add negative camber.
  • Adjustable Tension Arms (to dial in Caster).
  • Adjustable Rear Lower Control Arm (allows for adjustable camber, using included shims).

 

Pro: Get all the rubber out of the whole suspension for the ultimate “connection” to the road and confidence.

  • Full Advanced Package
  • Rear Knuckle Spherical Bearing Upgrade (comes with installation tool).
  • Rear Tension/Control Arms “Dog Bones”.
  • Rear Toe Rods (for cars WITHOUT rear-wheel steering).

 

Our suspension parts utilize the highest quality teflon-lined FK bearings, high-grade studs and nuts, billet aluminum and Titanium construction (when applicable) and a unique, thoughtful design.

  • Lower Control Arms use extended studs allowing for more shims and increased negative camber.
  • Titanium tie rod ends feature pinch bolts and extended threads for security when increasing track width and negative camber.
  • Adjustable Tension arms with shims to easily dial in caster.

 

Add a Motion Control Suspension coilover system for a complete transformation!

Watch

Specs

Part numbers
  • RWD (Carrera/S/GTS) / Basic 400-30182
  • RWD (Carrera/S/GTS) / Advanced 400-30089
  • RWD (Carrera/S/GTS) / Pro (no RWS) 400-30096
  • RWD (Carrera/S/GTS) / Pro (with RWS) 400-30090
  • AWD (Carrera 4/4S/4 GTS) / Basic 400-30338
  • AWD (Carrera 4/4S/4 GTS) / Advanced 400-30339
  • AWD (Carrera 4/4S/4 GTS) / Pro (no RWS) 400-30340
  • AWD (Carrera 4/4S/4 GTS) / Pro (with RWS) 400-30341
Brand
Dundon Motorsports
Listed for
992.1 · Carrera
Condition
New
Drivetrain
RWD (Carrera/S/GTS) · AWD (Carrera 4/4S/4 GTS)
Stage
Basic · Advanced · Pro (no RWS) · Pro (with RWS)

Install & help

What owners say

450+ independent reviews

Average 5.0 out of 5. Average from verified buyers, collected by Loox.

Watch 100+ video reviews

Recent reviews from other Dundon owners

  • Rated 5 out of 5. Verified buyer

    These guys are the best!!!! I’m beyond happy with the quality and service I got from Dundon. I’ll forever come back! Thank you guys

  • Rated 5 out of 5. Verified buyer

    Being a shop owner, I've seen dozens of exhaust brands. Non come close to the fitment of this dundon system. Fit Like a porsche OE product, sounds like a RSR Cup car. I'm impressed. You get what you pay for!!!

  • Rated 5 out of 5. Verified buyer

    Just installed the full Dundon full exhaust (Street Headers and SS muffler, PVD black tips) on my 992.2 GT3 Touring. The craftsmanship and build quality are outstanding. The exhaust really brings the 4.0L flat-six to life - a must have for .2 GT3. No CEL. Very impressed with the overall quality, ...

Reviews of this part