For a long time you had to sacrifice your street drivability if you wanted to upgrade to a motorsports damper. No longer! Our Dundon-spec MCS 3-Way dampers improve your Carrera to better than a GT3's formidable handling, while adding adjustability and forgiveness. We help...

Don't have a roll bar or you want to mount your MCS canisters elsewhere? Our rear canister mounting kit is perfect for you. The brackets slide ride into the rear carpet, no modification required and still easily accessible so you can adjust canister pressures...

The 991 Turbo and Turbo S are great cars, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. The impressive power and acceleration also cause premature wear on many of the rubber bushings. Our suspension arm...

Complete set (of 6) rear "dog bone" control arms for your 991 and 992 Turbo and TurboS. Remove rubber from the rear suspension for better feel, less slop, and more grip!

1. Adjustable - Increased Negative Camber The factory LCAs (Lower control arms) are not adjustable leaving you with limited alignment options. Our LCAs are two pieces featuring an inner and an outer arm, connected by extended length studs which allows for the use of...

Lightweight, strong, easy to install and adjust, our Titanium Tie Rod ends take your Porsche's handling and steering feel to the next level! Technical Description When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve...

Adjustable Tension Arms to remove rubber and make dialing in your alignment, caster and wheel position in the wheel well simple and easy. Technical Description Stock Brake ducts attach directly to the Dundon Tension Arms! No zip ties! No brake duct flopping around. Tension...

Dundon's Adjustable Sway Bar End Links meet the highest quality standards. We built these using the best rod-ends and spherical bearings in the industry (FK) alongside proper motorsport design concepts (like pinch bolts). Anodized billet aluminum ensures high strength and light weight. These end...

Stock 991 GT3 length +3mm front lower inner control arms with longer studs. Extended studs allow for increased negative camber (using more shims than stock studs would allow).

Why do you need adjustable sway bar end links? To ensure perfect corner-balance and zero pre-load on your sway bars with Dundon Motorsports' NEW adjustable sway bar end link set (front & rear)... When your 991 or 992 Turbo / Turbo S is corner-balanced...

This kit is to space out the front driveshafts on a 991 992 997 996 turbo. This is needed when adding adjustable front LCA's and increasing camber and track width. The increase in Track width can cause the front driveshafts to bind at ride...