-
991 Cantrell Bolt-In Roll Bar - Satin Black
Don’t fall for the less expensive bars on the market. They don’t match our well thought-out design and construction. As with all Cantrell Motorsports half cages, our main goal is to provide safety and superior fit and finish. The rear mounts bolt to the...- From $3,500.00
- From $3,500.00
- Unit price
- $0.00/ per
-
Satin Black
-
Custom Powdercoat
-
Paint to Sample
-
GT3 347 Side Muffler Deletes for 997/991
Enjoy 347 Stainless construction, same high quality valves as used in our battle tested Race Headers. Reduce weight through the elimination of side mufflers, reduce heat on the rear tires and under the decklid, no Drone, and 100% Lifetime Guarantee, including track use. Technical...- $2,955.00
- $2,955.00
- Unit price
- $0.00/ per
-
991 GT3/RS & 992 GT3 Rear "Dog Bone" Control Arm set - Complete
Complete set (of 6) rear "dog bone" control arms for your 991 GT3, GT3RS or 992 GT3. Remove rubber from the rear suspension for better feel, less slop, and more grip!- $2,760.00
- $2,760.00
- Unit price
- $0.00/ per
-
991 GT3/RS - Cobb AP with Dundon ProTune
The Accessport V3 is the world’s best ECU tuning solution for Porsche. The simple DIY plug and play connection to the car’s engine management system via the OBDII port allows for any GT3 owner to apply improved engine and PDK calibrations to their favorite...- From $2,595.00
- From $2,595.00
- Unit price
- $0.00/ per
-
Pre-Owned GT3 321 Side Muffler Deletes for 997/991
Enjoy 321 Stainless construction, same high quality valves as used in our battle tested Race Headers. Reduce weight through the elimination of side mufflers, reduce heat on the rear tires and under the decklid, no Drone, and 100% Lifetime Guarantee, including track use. Technical...- $2,245.00
$2,659.50- $2,245.00
- Unit price
- $0.00/ per
-
Complete Front Rotor Set (with hats and rings) for Performance Friction Track Day Kit - 405mm x 34mm (Pair)
Enjoy quick and easy replacement of your rotor rings with PFC's V3 Disc technology. *Complete Rotor Set - one pair of new rotor rings, new hats, and retaining circlips included.- $2,185.36
- $2,185.36
- Unit price
- $0.00/ per
-
Complete Rear Rotor Set (with hats and rings) for Performance Friction Track Day Kit - 380mm x 30mm (Pair)
Enjoy quick and easy replacement of your rotor rings with PFC's V3 Disc technology. *Complete Rotor Set - one pair of new rotor rings, new hats, and retaining circlips included.- $1,967.00
- $1,967.00
- Unit price
- $0.00/ per
-
GiroDisc Iron Rotor Conversion Kit - 991 GT3/RS/GT2RS 718 GT4RS with PCCB
Full Conversion Kit with Hats, Hardware and Rotor Rings. Sold in Pairs. The Girodisc system is a direct replacement for the OE disc however you must use the same pad shape that is used on the 991 GT3 that came with the iron rotors...- $1,950.00
- $1,950.00
- Unit price
- $0.00/ per
-
Dundon Motorsports Rear Lower Control Arms 991 GT3/RS
1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...- $1,955.00
- $1,955.00
- Unit price
- $0.00/ per
-
Adjustable Front Lower Control Arm Pair for 991 GT3
1. Improved Adjustability - Increased Negative Camber The factory LCAs (Lower control arms) have limited adjustability and thus limited alignment options. Our LCA's are slightly longer, and feature high-grade, extended length studs, which allows for the use of adjustment shims to dial in your...- $1,825.00
- $1,825.00
- Unit price
- $0.00/ per
-
GiroDisc Rotor Conversion Kit - 991 GT3/RS/GT2RS with Iron Rotors
Full Conversion Kit with Hats, Hardware and Rotor Rings. Sold in Pairs. The Girodisc system is a direct replacement for the OE disc on the 991 GT3 and GT3 RS with OEM iron rotors. No modifications are necessary, allows use of factory unmodified pads...- $1,750.00
- $1,750.00
- Unit price
- $0.00/ per
-
DSC Suspension Control Module - 991 Platform
Upgrade your car's handling with DSC! This revolutionary device turns your passive PASM system into an active suspension system with multiple personalities. The DSC module monitors acceleration, brake application, G forces, and many other parameters to tune your car's handling in milliseconds. Technical Description...- $1,500.00
- $1,500.00
- Unit price
- $0.00/ per
-
Dundon Motorsports Extended Length Titanium Tie Rod End Set
Lightweight, strong, easy to install and adjust, our Titanium Tie Rod ends take your Porsche's handling and steering feel to the next level! Technical Description When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve...- $1,395.00
- $1,395.00
- Unit price
- $0.00/ per
-
Replacement Front Rotor Rings for Performance Friction Track Day Kit - 405mm x 34mm (Pair)
Enjoy quick and easy replacement of your rotor rings with PFC's V3 Disc technology. No hardware replacement needed! *Rings only, not hats or circlip is included.- $1,422.00
- $1,422.00
- Unit price
- $0.00/ per
-
Dundon Motorsports Adjustable 991/981/718 GT Front Tension Arm Pair
Adjustable Tension Arms to remove rubber and make dialing in your alignment, caster and wheel position in the wheel well simple and easy. Technical Description Stock Brake ducts attach directly to the Dundon Tension Arms! No zip ties! No brake duct flopping around. Tension...- $1,315.00
- $1,315.00
- Unit price
- $0.00/ per
-
Dual Carbon Dive Planes (991.2 GT3 and GT3RS)
Reduce lift in the front of your 991.2 GT3 and GT3RS and aid in turn in grip! These Dual Dive Planes were designed with Computational Fluid Dynamics to aid in shape in placement and are part of our complete Aerodynamic upgrade package for the...- $1,195.00
$1,300.00- $1,195.00
- Unit price
- $0.00/ per
-
Replacement Rear Rotor Rings for Performance Friction Track Day Kit - 380mm x 30mm (Pair)
Enjoy quick and easy replacement of your rotor rings with PFC's V3 Disc technology. No hardware replacement needed! *Rings only, no hats or circlip is included.- $1,224.00
- $1,224.00
- Unit price
- $0.00/ per
-
Replacement Front Rotor Rings for Performance Friction Track Day Kit - 380mm x 34mm (Pair)
Enjoy quick and easy replacement of your rotor rings with PFC's V3 Disc technology. No hardware replacement needed! *Rings only, not hats or circlip is included.- $1,224.00
- $1,224.00
- Unit price
- $0.00/ per
-
GiroDisc Replacement Rotor Ring Pair - 991 GT3/RS/GT2RS with PCCB
For cars already equipped with GiroDisc Conversion Kits. Replacement Rotor Rings and Hardware ONLY. Sold in Pairs. These replacement rings are sold in pairs and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats. Please note that unless specifically...- $1,130.00
- $1,130.00
- Unit price
- $0.00/ per
-
GiroDisc Replacement Rotor Ring Pair - 991 GT3/RS/GT2RS with Iron Rotors
For cars already equipped with GiroDisc Conversion Kits. Replacement Rotor Rings and Hardware ONLY. Sold in Pairs. These replacement rings are sold in pairs and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats. Please note that unless specifically...- $1,030.00
- $1,030.00
- Unit price
- $0.00/ per













