CFD optimized for improved performanceShift aero balance forward (improves front end grip)Allows fine tuning of aero balance (forward biased)Simple bolt-on or double-sided tape installation with templates (included)   The dive planes for the Porsche 991 GT3 and 991 GT3RS  were specifically designed to increase...

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends...

Direct replacement for your stock front upper strut mount. Machined from T6061 Aluminum and uses high-grade, teflon-lined spherical bearings and grade 10.9 pressed-in studs for easy install.   Adds approx. -1.3° to the front with minimal caster change.

With a configurable internal compartment and pockets built specifically to carry your Helmet, HANS Device, Nomex driving gear and shoes, this bag has everything you need, and nothing you don't.   A comfortable top handle, modular shoulder strap, and roller bag handle sleeve make...

Stock Brake ducts attach directly to the Dundon Tension Arms! No zip ties! No brake duct flopping around. Tension arm shims ARE included. 0.8mm x4 qty 1.6mm x 2 qty 3.2mm x2 qty 9.5mm x2 qty 12.7mm x2 qty EASILY adjust caster to properly...

Approach your 991 GT3RS upgrade journey in the right steps for you and how you use your car! Improve your suspension beyond the factory Weissach Package cars!   Our meticulously designed and carefully curated suspension packages are built to give you the improvement and...

Built specifically for 991 GT3RS and GT2RS cars. Add negative camber and increase front track width with our extended front inner lower control arm. Extended studs allow for additional shims to hit your camber targets. Also removes rubber bushings from the steering system for...

Stock 991 GT3 length rear lower inner control arms. Remove rubber from the rear suspension for better feel, less slop, and more grip!

991 GT3/RS & 992 GT3 Rear Outer Lower Control Arm pair - For use with Dundon Inner LCA's

1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...

Complete set (of 6) rear "dog bone" control arms for your 991 GT3, GT3RS or 992 GT3. Remove rubber from the rear suspension for better feel, less slop, and more grip!

Pre-Owned Replacement tip sets for your Dundon Lifetime Muffler ONLY. Does NOT fit OE Porsche Mufflers. Proper tip length is important, so please ensure you select the correct application.

A very lightly used version of our most popular 991 exhaust package. Street Headers and Lifetime Muffler! This system has less than 300 miles on it. Photos are of the actual system. Dundon Street (Catted) tuned length headers and valved side delete exhaust system...