86 results found for “Front Camber Plates”

Direct replacement for your stock front upper strut mount. Machined from T6061 Aluminum and uses high-grade, teflon-lined spherical bearings and grade 10.9 pressed-in studs for easy install.   Adds approx. -1.3° to the front with minimal caster change.

Upgrade your 996 Turbo or Turbo S dampers to true Motorsports quality. Not your run of the mill "Road and Track" Dampers. The package comes complete, dampers, springs, camber plates, everything ready for install. Spring rates are designed for comfort and performance! For a...

Approach your 992 GT3RS upgrade journey in the right steps for you and how you use your car! Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.  These packages will allow for a precise...

Upgrade your 996 GT3 or Carrera C2 dampers to true Motorsports quality. Not your run of the mill "Road and Track" Dampers. The package comes complete, dampers, springs, camber plates, everything ready for install. Spring rates are designed for comfort and performance! For a...

Exclusive to 992 GT3 and 992 GT3RS. Stock camber adjustment is limited to -2.5°. Add Dundon's Upper Camber Link to achieve up to -4.0°! The actual number will depend on your lower control arm configuration and the ride height, but this makes achieving your...

Approach your GT4, Spyder or GT4RS upgrade journey in the right steps for you and how you use your car!   Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.   These packages will...

Improve the handling on your 718 Cayman and Boxster, S and GTS to compete with the GT3's with our custom curated and valved MCS 3way damper package For a long time you had to sacrifice your street drivability if you wanted to upgrade to...

18 - Stainless Steel Studs 18 - Serrated Flange Lock Nuts 4 - 30mm long bolts 4 - distorted flange lock nuts 2 - 2.5" v-band gaskets 10 - Stainless Steel Conical Springs

Includes: 4 - 3" V-Band Clamps 4 - 3" V-Band Gaskets 2 - 991 Cat/Engine Brackets 16 - M8 Oversize Washers 8 - M8x1.25mm Lock Nuts 8 - M8x1.25mm Black Oxide Bolts 20mm Length

Add Camber and fit more agressive wheels with your MCS or other coilover applications

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends...