133 results found for “mcs+suspension”

1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...

When you increase negative camber (via a longer lower control arm), the stock tension arm does not allow for adjustment to correct the change in caster. Dundon's adjustable Tension Arms allow for full adjustment and precise locating of the wheel in the wheel well....

Spring upgrade Kit for cars currently equipped with Dundon MCS 3-Way Dampers. 140/170 150/180 160/200 170/220

Complete set rear "dog bone" control arms for your 996 and 997 Carrera. Remove rubber from the rear suspension for better feel, less slop, and more grip! These arms use PTFE Monoballs with hardened stainless races to prevent corrosion. Press fit and retained with...

Adjustable Tension Arms to remove rubber and make dialing in your alignment, caster and wheel position in the wheel well simple and easy. Technical Description Stock Brake ducts attach directly to the Dundon Tension Arms! No zip ties! No brake duct flopping around. Tension...

1. Adjustability - Increased Negative Camber The factory LCAs (Lower control arms) are not adjustable leaving you with limited alignment options. Our LCAs are two pieces featuring an inner and an outer arm, connected by extended length studs which allows for the use of...

Lightweight, strong, easy to install and adjust, our Titanium Tie Rod ends take your Porsche's handling and steering feel to the next level! Technical Description When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve...

Complete set (of 6) rear "dog bone" control arms for your 991 GT3, GT3RS or 992 GT3. Remove rubber from the rear suspension for better feel, less slop, and more grip!

1. Increased Negative Camber Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part. 2. Improved Handling and Grip Our LCAs...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...