158 results found for “control arms”

Exclusive to 992 GT3 and 992 GT3RS. Stock camber adjustment is limited to -2.5°. Add Dundon's Upper Camber Link to achieve up to -4.0°! The actual number will depend on your lower control arm configuration and the ride height, but this makes achieving your...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

The 987 Boxster/Cayman/S/GTS/Spyder is a great car, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. Our suspension arm packages really open things up, allowing you to get a "proper" alignment on the car for better...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

Dundon + HYTORC = Game Changer! Swap wheels on your center-lock equipped Porsche (or non-Porsche, for that matter) without any other tools (or people)!    A couple of key details that set this apart from other manufacturers: This is the same method the factory...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...

Direct replacement for your stock front upper strut mount. Machined from T6061 Aluminum and uses high-grade, teflon-lined spherical bearings and grade 10.9 pressed-in studs for easy install.   Adds approx. -1.3° to the front with minimal caster change.

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends...

Our Rear Tie Rods for your 981/718 GT4 GT4RS  are here!  The Rod ends are PTFE Extreme strength extended units. These are custom made for us by FK Rod ends and have extra long 2 5/8” of threaded end for more adjustment, strength, and...

GT cars come from the factory with fixed-length sway bar end links. When you change the ride height without adjustable links, you risk a "non-neutral" suspension due to sway bar preload and compromised geometry. When one side sits higher, the sway bar twists to...