181 results found for “by MCS 3-Way”

The 997 Carrera/S/GTS is a great car, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. Our suspension arm packages really open things up, allowing you to get a "proper" alignment on the car for better...

The 992 GT3 and 991.2 Speedster mark a drastic departure in exhaust configuration when compared with the last 15+ years of 911 GT3. Gone are the large side mufflers and nearly universal center muffler. The 992 platform has a gigantic and complicated center muffler...

Improve the handling on your 987 Cayman and Boxster, S and Spyder to compete with the GT3's with our custom curated and valved MCS 1-Way damper package. For a long time you had to sacrifice your street drivability if you wanted to upgrade to...

Direct replacement for your stock front upper strut mount. Machined from T6061 Aluminum and uses high-grade, teflon-lined spherical bearings and grade 10.9 pressed-in studs for easy install.   Adds approx. -1.3° to the front with minimal caster change.

1. Eliminates the OPF  2. No Check Engine Lights, and no tuning required  3. Significant power and torque gains: +31whp/+55wtrq! 4. Weight savings over stock: 321 Stainless Steel Muffler version: 10 lbs lighter than stock Titanium Muffler: 25 lbs lighter than stock Inconel 625...

The Valkyrie Complete Aero Package includes:  Valkyrie Swan Neck Carbon Wing Dual Carbon Dive Planes Carbon Splitter with 3D-printed lip spoiler and vortex generators The Complete Dundon aero package for the 991.2 GT3RS was designed to increase downforce while minimizing the drag coefficient. Using...

Approach your 997 GT3/GT3RS upgrade journey in the right steps for you and how you use your car! Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.  These packages will allow for a precise...

Approach your 996 GT3/GT3RS upgrade journey in the right steps for you and how you use your car! Our meticulously designed and carefully curated suspension packages are built to give you the improvement and adjustment you need.  These packages will allow for a precise...

These 625 inconel inserts block the expansion chamber on the lower pathway, dramatically reducing the muffling effect. The combination of the titanium muffler with the loud inserts gives you the ultimate “have your cake, and eat it, too” exhaust. The quietest system we make...

Our Rear Tie Rods for your 981/718 GT4 GT4RS  are here!  The Rod ends are PTFE Extreme strength extended units. These are custom made for us by FK Rod ends and have extra long 2 5/8” of threaded end for more adjustment, strength, and...

Contains multiple shims in various sizes for front and rear lower control arms on 992 GT3 cars.   Front Kit contents: 4x - .031" / .75mm 2x - .063" / 1.5mm 2x - .125" / 3.2mm 2x - .188" / 4.75mm 2x - .250"...

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends...

The 992 Turbo and Turbo S are great cars, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. The impressive power and acceleration also cause premature wear on many of the rubber bushings. Our suspension arm...