992 GT3RS PRODUCTS

1. Increased Negative Camber

Our LCA's are slightly longer, and feature high-grade, extended length studs. This design allows for a taller shim stack to achieve more negative camber than what is available from the factory Porsche part.

2. Improved Handling and Grip

Our LCAs allow your car to haver a wider front track width, pair that with an increase in negative camber and you will notice a better "bite" during turn in, improved stability and higher cornering speeds.

3. Precision and "Feel"

Our LCAs feature upgraded bushing, no longer do you have to worry about worn out rubber bushings, we use high-grade Teflon-coated spherical bushings. This removes the "slop you get from the rubber variants and allows for much more precise steering feedback.

These LCAs also feature adjustable caster pucks so that you can readjust your caster (adjusting the wheel forward/backward within the wheel well) while adjusting camber.

4. Better Tire Wear

Dialing in your camber with our LCAs means more even tire wear. Our parts prevent the outer shoulder of your tire from wearing prematurely and ensures a more even distribution of heat and wear across the tread.

The Girodisc system is a direct replacement for the OE disc on the 991 GT3 and GT3 RS with OEM iron rotors.  No modifications are necessary, allows use of factory unmodified pads unlike most aftermarket solutions for this application.  The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum.  The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc.  The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.The rotor and hat have a floating mount system, which utilizes 12 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.Once the Girodisc system is in place, simply replace the cast iron rotor when needed.Sold/priced per pair.

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends offer adjustable rods with extended length threads to allow for a more aggressive track alignment without the risk of too-little threads attaching to the steering rack. 

Titanium rod construction keeps unsprung weight down to improve steering feel and performance. We also use high-quality rod-ends, ARP high-strength bolts and spherical bearings paired with a 2-bolt titanium pinch clamp for easy install and adjustment.

Fits all:

996 GT3/RS

997 GT3/RS

997 GT2/RS

991 GT3/RS

981 GT4

991 GT2RS

982/718 GT4/RS

992 GT3

When you increase negative camber (via a longer lower control arm), the stock tension arm does not allow for adjustment to correct the change in caster. Dundon's adjustable Tension Arms allow for full adjustment and precise locating of the wheel in the wheel well. Our arms also retain the aerodynamic profile of the factory arms so there are no compromises!

• EASILY adjust caster to properly dial in your wheel position and alignment.
• Grade 10.9 12-point nuts and washers included
• High-grade Teflon-lined FK bearings

These replacement rings are sold in pairs and include replacement hardware. The only parts you will reuse are your existing GiroDisc hats.

Please note that unless specifically noted, GiroDisc replacement rings are only designed to work with GiroDisc hats. They are not designed to be used with other brands, including hats from cars equipped with 2-piece rotors from the factory.