992 GT3 Touring Products

We'd been asked by a few to make a Crack Pipe that wasn't as much of a commitment but still true to the original Megaphone Crack Pipe. Meet the Mini Crack, this one works with Dundon valved side muffler deletes or our Street Headers, for both 991 and 997! 992 cars will need our cat-back kit or our full street header package. The only sound better than a Porsche is the sound of a Porsche that’s earned its racing stripes. That’s why we’ve designed the Crack Pipe — the ultimate, unbridled expression of Porsche’s Motorsport DNA (with a little help from Dundon Motorsports). If you want to seriously turn heads at the track when you fly by, this is the one for you. It's still loud but the valves do take a bit of the edge off while cruising.

• Inconel 625
• Megaphones for enhanced wave strength (more power)
• Full 3.5" X Pipe merge

Not for the faint of heart, this is LOUD, screams like an RSR at full throttle. 

When dialing in a track setup on modern GT Porsches, increasing negative camber is a great way to improve front grip and extend tire life. However, the stock tie rods limit how much camber is possible. Dundon Motorsports' Titanium Extended Length Tie Rod ends offer adjustable rods with extended length threads to allow for a more aggressive track alignment without the risk of too-little threads attaching to the steering rack. 

Titanium rod construction keeps unsprung weight down to improve steering feel and performance. We also use high-quality rod-ends, ARP high-strength bolts and spherical bearings paired with a 2-bolt titanium pinch clamp for easy install and adjustment.

Fits all:

996 GT3/RS

997 GT3/RS

997 GT2/RS

991 GT3/RS

981 GT4

991 GT2RS

982/718 GT4/RS

992 GT3

When you increase negative camber (via a longer lower control arm), the stock tension arm does not allow for adjustment to correct the change in caster. Dundon's adjustable Tension Arms allow for full adjustment and precise locating of the wheel in the wheel well. Our arms also retain the aerodynamic profile of the factory arms so there are no compromises!

• EASILY adjust caster to properly dial in your wheel position and alignment.
• Grade 10.9 12-point nuts and washers included
• High-grade Teflon-lined FK bearings

• Eliminates Preload: Adjustable links let you set the correct length during corner balancing, so the sway bar isn’t forced to twist to fit uneven ride heights.
• Restores Predictable Handling: By removing preload, handling remains consistent in both left and right turns.
• Maintains Proper Geometry: Adjustable links allow you to keep the sway bar arms parallel to the ground after lowering, preserving intended performance.

These 625 inconel inserts block the expansion chamber on the lower pathway, dramatically reducing the muffling effect. The combination of the titanium muffler with the loud inserts gives you the ultimate “have your cake, and eat it, too” exhaust. The quietest system we make at low-RPM, and one of the loudest when you mash the fun-pedal!

Inconel 625 is a nickel-based super alloy known for its incredible strength and durability, especially under intense heat. This strength allows us to use very thin material that just sneaks into the Titanium muffler inlet.

*NOT compatible with Steel mufflers.

Replacement tip sets for your Dundon Lifetime Muffler ONLY. Does NOT fit OE Porsche Mufflers. Proper tip length is important, so please ensure you select the correct application.

Pre-Owned Replacement tip sets for your Dundon Lifetime Muffler ONLY. Does NOT fit OE Porsche Mufflers. Proper tip length is important, so please ensure you select the correct application.