Filter
215 results
20
- 10
- 15
- 20
- 25
- 30
- 50
Sort by:
- Featured
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
-
Dundon Motorsports Suspension Setup Package for 997 C4/C4S/Turbo/Turbo S
The 997 Turbo/Turbo S is a great car, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. Our suspension arm packages really open things up, allowing you to get a "proper" alignment on the car for...- From $3,825.00
$4,250.00- From $3,825.00
- Unit price
- / per
-
Dundon Motorsports Suspension Setup Package for 987 Boxster/Cayman/S/GTS/Spyder
The 987 Boxster/Cayman/S/GTS/Spyder is a great car, but the factory suspension has almost no adjustability, leaving you a very narrow range of available settings. Our suspension arm packages really open things up, allowing you to get a "proper" alignment on the car for better...- From $4,495.50
$4,995.00- From $4,495.50
- Unit price
- / per
-
991.1 GT3/GT3RS Valkyrie Carbon Splitter
ONLY FOR 991.1 GT3 or GT3RS with our Swan Neck Rear Wing. Adding this to a car with stock rear wing will make the car unstable due to too much front downforce. Add much needed front downforce to your GT3RS. Designed to complement the 991 GT3RS...- $7,465.50
$8,295.00- $7,465.50
- Unit price
- / per
-
997.2 GT3/Carrera MCS 3-Way Suspension Package (Non-FAL)
comes complete with camber plates, springs, canisters and canister mounts!- $11,245.50
$12,495.00- $11,245.50
- Unit price
- / per
-
991.1 GT3RS Valkyrie Carbon Splitter
ONLY FOR 991.1 GT3RS with our Swan Neck Rear Wing. Adding this to a car with stock rear wing will make the car unstable due to too much front downforce. Add much needed front downforce to your GT3RS. Designed to complement the 991 GT3RS Swan Neck Wing...- $8,095.50
$8,995.00- $8,095.50
- Unit price
- / per
-
991.1 GT3RS Complete Aero Package
If you want to go faster on street and on track, then: Double the Downforce of the Stock 991.1 GT3RS. Make the air do your bidding and improve the aerodynamic performance of your GT3RS.*991.2 GT3RS pictured, get a free Dundon Swag Package for professional...- $16,276.50
$18,085.00- $16,276.50
- Unit price
- / per
-
Dundon Motorsports 992 GT3RS Adjustable Sway Bar End Link Set
Why do you need adjustable sway bar end links? To ensure perfect corner-balance and zero pre-load on your sway bars with Dundon Motorsports' NEW adjustable sway bar end link set (front & rear). When your 992 GT3RS is corner-balanced or even just sit...- $805.50
$895.00- $805.50
- Unit price
- / per
-
"Cup" End Fences for Dundon Valkyrie Splitter
These "Cup" End Fences are a direct bolt-on to your existing Dundon Valkyrie Splitter and improve efficiency and increase downforce. Not ideal for street use, as they extend further out than the standard end fences.- $607.50
$675.00- $607.50
- Unit price
- / per
-
991 992 997 Turbo Front Axle Spacer Kit
This kit is to space out the front driveshafts on a 991 992 997 996 turbo. This is needed when adding adjustable front LCA's and increasing camber and track width. The increase in Track width can cause the front driveshafts to bind at ride...- $265.50
$295.00- $265.50
- Unit price
- / per
-
991 992 Turbo Rear LCA Assembly
Add much needed rear camber with our 991 and 992 Carrera Lower Control Arm!- $1,048.95
$1,165.50- $1,048.95
- Unit price
- / per
-
991.2 Cup Carbon Splitter
Our Carbon Splitter adds the front downforce needed to really take advantage of the Valkyrie Swan Neck Rear Wing. Is possible to pair with a stock Cup wing, but will be very "pointy" and only recommended for use with Cup wing at maximum Angle...- $7,465.50
$8,295.00- $7,465.50
- Unit price
- / per
-
991.2 GT3RS Stage 2 Aero Package
Add major downforce and performance with our 991.2 GT3RS carbon swan neck wing and carbon dual dive planes. This package gives big downforce and major confidence to the already formidable 991.2 GT3RS!- $8,271.00
$9,190.00- $8,271.00
- Unit price
- / per
-
996 997 Front Upper Strut Mounts / Camber Plates
Work with stock dampers and our MCS dampers Fits ALL 996 and 997 911 ModelsFeatures: machined aluminum plates, 10.9 grade pressed-in studs, high quality monoball bearings.- $445.50
$495.00- $445.50
- Unit price
- / per
-
997 996 Rear Upper Strut Mounts / Camber Plates
Work with stock dampers and our MCS dampers Fits ALL 996 and 997 911 ModelsFeatures: machined aluminum plates, 10.9 grade pressed-in studs, high quality monoball bearings.- $445.50
$495.00- $445.50
- Unit price
- / per
-
Carbon Wind Deflectors for 991 981 and 718's
We were never happy with the "paste on" wind deflectors and the other styles with plastic "guts" that just either strip out the screw hole and fly off, or debond and fly off. So we made the ultimate wind deflector for 718/981/991 cars. CNC machined...- $719.10
$799.00- $719.10
- Unit price
- / per

















