Share This Product

If you want to go faster on street and on track, then: Double the Downforce of the Stock 991.2 GT3RS. Make the air do your bidding and improve the aerodynamic performance of your GT3RS.


The Valkyrie Complete Aero Package includes: 

  • Valkyrie Swan Neck Carbon Wing
  • Dual Carbon Dive Planes
  • Carbon Splitter with 3D-printed lip spoiler and vortex generators

The Complete Dundon aero package for the 991.2 GT3RS was designed to increase downforce while minimizing the drag coefficient. Using Computational Fluid Dynamics (CFD) allowed us to make a complete package, swan neck wing, dual carbon dive planes and front carbon splitter tailored to the shapes of Porsches 911's, Caymans and 911 Cups. 


A one size fits all approach may work a little bit, but is not optimized for your GT3RS.


The Complete Valkyrie Aero Package gives over 1500lbs of downforce at 160mph, almost 1000lbs more than a stock 991.2 GT3RS at maximum settings. All this at mild settings of 90mm ride height and 5* wing angle. 


While absolute numbers are great, where things count for aero isn't 160 or 200mph downforce numbers but 80-120mph numbers as this is generally the speed you are trying to turn the car and want your 911's aerodynamics to really help you.  


This is where our package really shines with 885lbs of downforce at 120mph, 550lbs more than stock at maximum settings


The Complete Valkyrie Aero Package includes:

  • Valkyrie Swan Neck Wing 
  • Dual Carbon Dive Planes 
  • Full Carbon Splitter


Every Detail of the package was refined and designed to work together Look at the 100% Carbon Wing Ends for instance. Ours are 3 dimensional, with flowing prepreg carbon contours and cutouts to aid in vortex generation to further improve the Valkyrie wing's performance. All of this leads to a faster more planted car and a more confident driver 


The wing risers or wing uprights for our package are unique to the package as well. The uprights along with substantial reinforcement to the upright supports, and chassis set this kit apart! Think the stock uprights can support substantial downforce increases? Think again... 


The Full Carbon Splitter is reinforced real prepreg carbon fiber, not plastic. 

Brackets attach to the frame rails and chassis of the car 

Simple installation and removal 4 bolts and its on and off, no cutting or drilling required 

Diffusers, Vortex Generators and End Plates all Developed in Wind Tunnel Validated Computational Fluid Dynamics 

Shaped to take advantage of ground effects to promote more down force and less drag: Full Kit is less drag than the Valkyrie Wing and Dive planes alone with much more downforce. 

The Package is made to increase front downforce when the car is in Roll and Yaw (i.e: while turning), bringing the balance of pressure forward to help attack apexes with ease! 


You must upgrade you suspension for the full package.  Our MCS 3-way damper package is the perfect addition, is setup, tested and ready to go!  You can find it here!  


991.2 GT3RS MCS 3-Way Damper Package


Check the Pictures and Shoot us a message, call or email for more info! The Complete Valkyrie Aero Package will transform your 991.2 GT3RS. 




Check out our installation instructions on:

Verus V1X Carbon Wing:


Dual Carbon Dive Planes:

Carbon Splitter: